PIVOT 3-DRIVE THROTTLE CONTROLLER WITH CRUISE FOR TOYOTA SIENTA NHP170G 3DR

PIVOT

3DR

TOYOTA SIENTA NHP170G

1NZ-FXE

Standard model (collision mitigation system vehicles non-compliant)
_x000D_ Model Year: 2015/7 ~ 2018/8
_x000D_ harness No: 11A (Sold Separately)
_x000D_ brake harness part number: BR-9 (Sold Separately )
_x000D_ Features
_x000D_ AUTO CRUISE Increased Handleability and Comfort
_x000D_ AUTO CRUISE
_x000D_ Cruise automatically at set speed (30-140km / h).
_x000D_ REMOTE SWITCH
_x000D_ Switch can be installed to the wiper lever, near the shift lever or any other easy to operate position using double-sided tape.
_x000D_ Remote Control
_x000D_ Use switch to remotely control all Auto Cruise operations.
_x000D_ Stable and Safe Remote Control
_x000D_ Performance data of AUTO CRUISE
_x000D_ Throttle Controller with Response Mode
_x000D_ RESPONSE MODE
_x000D_ (5 Levels) Increased response to low and mid range acceleration to near that of wired characteristics.
_x000D_ SPORTS MODE
_x000D_ (7 Levels) Increased response across all ranges of acceleration is best for Sports driving.
_x000D_ ECO MODE
_x000D_ (5 Levels) Reduced response to low and mid range acceleration for eco-driving
_x000D_ NORMAL
_x000D_ Standard performance.
_x000D_ Performance data of Throttle Controller_x000D_ Standard performance.
_x000D_ Performance data of Throttle Controller_x000D_ Standard performance.
_x000D_ Performance data of Throttle Controller

Pre-crash safety system vehicles equipped 3DA-C, the corresponding
_X000D_ collision mitigation system Car 3DR-L is the attachable
_X000D_ collision mitigation system vehicles, 3DR-L, 3DA-B, 3DA-C , 3DA-T is a possible correspondence, other products will be not applicable.
_x000D_ models that check the vehicle is not completed will be Not applicable.
_x000D_ in trouble when fitted with a corresponding non-product to the collision mitigation system car, we do not take any responsibility.
_x000D_ each harness for 3-drive is on quality assurance, please do not use the competitor's product.
_x000D_ When the auto cruise when you replace the brake lamp LED does not work, please use to return to the light bulb. Please be sure to initial settings when you installed
_x000D_ to the new vehicle.
_x000D_ removal of the accelerator connector, please go to the "after the engine is stopped for more than 15 minutes."
_x000D_ it can not be installed on the car below.
_x000D_ 1 genuine auto-cruise vehicles equipped 2 wire throttle vehicles

Images are for illustration purpose only. Actual product may vary.