Panasonic WX-SE200DN Dante Expansion Receiver
SKU: 24645866471

Panasonic WX-SE200DN Dante Expansion Receiver

$953.20 $1059.11
Save 10%
No.2 Bestseller on belilabod.com >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 8 - Jul 13

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Panasonic WX-SE200DN Dante Expansion ReceiverPanasonic WX SE200DN Dante Expansion Receiver The Panasonic WX SE200DN Dante Expansion Receiver is a powerhouse addition to your existing WX SR204DN 4 channel wireless microphone system. Designed to seamlessly integrate with Panasonics wireless ecosystem, this expansion unit lets you add up to four additional wireless microphone channels without complicating your antenna setup. Built for professional environmentsconference centers, houses of worship,

Panasonic WX-SE200DN Dante Expansion Receiver

The Panasonic WX-SE200DN Dante Expansion Receiver is a powerhouse addition to your existing WX-SR204DN 4-channel wireless microphone system. Designed to seamlessly integrate with Panasonics’ wireless ecosystem, this expansion unit lets you add up to four additional wireless microphone channels without complicating your antenna setup. Built for professional environments—conference centers, houses of worship, schools, corporate events, and live productions—the WX-SE200DN delivers reliable, scalable performance within a compact, network-friendly chassis. By leveraging Dante digital audio networking, you gain flexible routing, digital clarity, and synchronized channels that work harmoniously with your Dante-enabled mixers, recorders, and IP audio networks. If you need more wireless capacity without sacrificing reliability, the WX-SE200DN is the natural upgrade for your 4-channel system.

  • Expand capacity without reworking your whole system. The WX-SE200DN adds up to four extra wireless microphone channels to an existing WX-SR204DN system, allowing you to scale from four to eight channels in a single network. This makes it ideal for larger events or venues that demand more simultaneous mic coverage while keeping your core setup intact.

  • No extra antennas required for expansion. Designed to work with the existing antenna plan of your 4-channel system, the WX-SE200DN enables you to grow your wireless capability without incurring additional antenna hardware or complex RF management. This keeps installation simple and reduces setup time for staff and technicians.

  • Dante-enabled digital audio networking for modern workflows. Output and route your audio over Dante to compatible mixers, digital consoles, recording devices, and IP-based audio networks. The expansion receiver preserves audio quality with low latency and tight synchronization, making it easy to integrate into classroom, corporate, or live-sound environments that rely on Dante-enabled infrastructure.

  • Reliable integration with WX-SR204DN for streamlined operation. The WX-SE200DN is purpose-built to complement Panasonic’s WX-SR204DN wireless mic solution, delivering a cohesive experience with centralized control, consistent audio performance, and straightforward channel management across all four additional inputs.

  • Professional, compact design suited for demanding installations. With a durable chassis and a footprint that fits neatly into standard audio racks or equipment layouts, the WX-SE200DN blends into professional environments while providing flexible expansion capabilities that keep pace with evolving requirements.

Techncial Details of Panasonic WX-SE200DN Dante Expansion Receiver

  • Get this information from the "specifications" section of the product from https://ec.synnex.com/ using product "UPC" or "SKU" as reference

How to install Panasonic WX-SE200DN Dante Expansion Receiver

  • Power down your WX-SR204DN system and associated network equipment before making any connections to avoid misconfigurations.
  • Connect the WX-SE200DN to the same network domain as your WX-SR204DN and Dante-enabled devices, ensuring all devices share the current Dante networking settings.
  • Power on the WX-SE200DN and verify that it appears in the Dante Controller alongside your existing devices, indicating proper discovery and synchronization.
  • In the WX-SR204DN control interface, map the four new channels to the desired wireless microphones, adjusting basic parameters such as gain and mute states as necessary for your environment.
  • Perform a live signal check by speaking into each microphone to confirm clear audio transmission, proper routing to the main mixer or recording device, and correct channel labeling in your Dante-enabled workflow.
  • Save the configuration and monitor the Dante network for stability, watching for any RF interference or latency issues during typical operation to ensure ongoing reliability.

Frequently asked questions

  • Q: What does the WX-SE200DN do?

    A: It expands a WX-SR204DN 4-channel wireless mic system by adding up to four additional channels via Dante, without requiring extra antennas in most configurations.

  • Q: Do I need extra antennas to use the expansion receiver?

    A: No. The WX-SE200DN is designed to extend your existing system without requiring additional antennas, assuming your current RF planning and antenna setup support the expanded channels.

  • Q: Is the WX-SE200DN compatible with Dante workflows?

    A: Yes. The unit outputs Dante digital audio, enabling clean routing to Dante-enabled mixers, recorders, and IP audio networks for modern professional setups.

  • Q: How many additional channels can I use?

    A: The receiver adds up to four wireless microphone channels to your existing WX-SR204DN configuration, bringing the total potential channels in the combined system to eight.

  • Q: Where can I find the exact specifications?

    A: Refer to Panasonic's official product page and the distributor's specifications listing for up-to-date technical details and compatibility notes.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 24645866471

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.8 ★★★★★
Based on 2272 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
O
Verified Purchase
Ordray
Waukegan, US
★★★★★ 4
Great if you're average height.
Color: Black
Comfortable for the price. The seat could be a bit better, but for a budget friendly ergonomic chair, it's well made and has helped a lot with my back pain caused by my previous desk chair. Assembly wasn't terribly difficult, though I did have one screw with damaged threads. Luckily they ship spare screws in the kit, so that was a non-issue. Rollers work great on my small rug and hard flooring and don't tend to tangle cords or cables too much. Size wise, works great for my frame (5 ft 6 in) but for someone more than a few inches taller than myself, you should probably look at another chair.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 4, 2025
W
Verified Purchase
Wilbert Bean
Boise, US
★★★★★ 5
Great chair
Color: Black
I am very happy with my purchase. Easy to assemble but be aware your drill bits included with your set won't fit their screws. However, you can get a fair bit done with the drill and then use tool included to adjust. Super comfortable and exactly the right height for my desk. Highly recommend for quality exceeding price point.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 9, 2026
D
Verified Purchase
Dave
West Palm Beach, US
★★★★★ 1
Review from an "actual" tall person who doesn't weigh 400 pounds.
Color: Black
I recommend this chair. Firstly, I looked at least dozens of chairs and nearly every review in trying to select a chair. I didn't want to spend $200. It's confusing because everyone's idea of perfect is of course subjective. One thing, What is tall? I'm 6'6" I think that's pretty tall. Others feel that 6'0" is tall. LOL In the listing, it shows this chair is good for a 6'5" person which I think is pretty accurate. I weigh about 210 pounds and the padding is just fine. One thing I would push manufacturers to do would be to give accurate measurements. Seat height low and high. Back support height. Head rest added to back height etc.! Maybe actual human measurements that the chair is geared toward. Nice to know that 400 lbs is cool but that doesn't tell me much. My primary goal was to find a chair I could sleep in because I recently had a back injury and sleeping on my bed, while fine, resulted in intense pain trying to get up in the morning. We'll see what happens but the headrest reaches my head which was goal one. The lumbar fits so I don't need to use cushions and pads etc. I found the upper position of the support to be right for me and it's super comfortable. Plus number two. The raised height of the chair fits my long legs (inseam 36") Plus three. I wanted adjustable arm rests but this one doesn't have that. No biggie, for me the height of the arm rests is pretty much just right. It might be a little high for some. The back leaning adjustment doesn't lock except for upright. Locking upright is good, and leaning back - for me - doesn't really need to lock. Being an actual tall person made me really skeptical. I'm relieved that I won't have to take it apart to return it. The assembly was straight forward and pretty easy though I'd suggest not really tightening the arms snugly before getting the back squared away - the alignment is easier if you do that. I got the chair for $109 with 21% off. It's slightly wobbly yet feels pretty well made. It rolls well enough. I'm quite satisfied with the purchase and I'll come back if there are updates. Edit one. I've had it a week now and found I couldn't sleep in it. I think it would be better if the back could recline separately from the seat. There might also be figuring out a way to support my legs due to the back and seat reclining together rather than separately. Two. I kind of wish more now that the arms were adjustable for height and tilt if that makes sense. I have a bar stool next to me on the right in front of my desk that is the right height to relax my right arm while reaching my mouse on the desk so that's my work around there. Three. The casters are kind of basic and don't roll as easily on the floor matt as my former second hand chair - they would probably be fine on a hard surface. I'll probably switch them out. Four: The lumbar support, while mostly in the right place is unpadded and creates kind of a hard spot there. I've re-introduced my lumbar support pillows for comfort there. All in all, I'm still happy with the $100 purchase. In my experience, being pretty tall always comes with compromise and these notes are not deal breakers for me. Yea, It can always be more perfect but unless you're in a showroom test driving and willing to spend $300? Right. UPDATE: I'm really not satisfied with this chair and in fact, I wish I hadn't bought it. Firstly, the pneumatic post that the chair part connects with is wobbly depending on which way it is facing according to which way the legs are aligned. It's like a poor fit and I'm pretty mechanically inclined. Second and also important. The lock to keep it upright and inclined only worked for a few weeks. For a while, you had to mess with it to engage the upright position. It no longer works. Worse than that, the lumbar support pad disconnected with the chair and is now floating and after only a month or so, the remaining supports for the Lumbar rest have dug into the fabric on the back of the chair creating holes in the back's fabric. I've tried but there is no way to reconnect that bit without removing the back's fabric as far as I can see. I'm taking this down to one star for sure. Poor design? Poor manufacturing? Yea. I wouldn't suggest this chair to anyone. If the company comes up with a solution, I'll continue my review. As for now. Not a recommendation. Update: Not impressed and kind of crappy. Mentioned is that the so called lumbar thingy disconnected and is unusable. I've got my own pad which seems to help. Also, it's wiggly where the chair connects to the base. Months later, I might toss it and go back to the chair I bought locally and second hand. Don't buy this chair!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 20, 2025
Q
Verified Purchase
QZ
Whiting, US
★★★★★ 5
Great Instructions, Straightforward Assembly
Color: Black
I just received this chair today, so my product review is mostly on the packaging, instructions, and assembly. The product was well-packaged, and it was obvious when I unboxed it that a lot of care and thought went into packing it in the most efficient way that would also protect the parts. I was positively impressed with the packaging. I was also incredibly impressed with the instructions and assembly process. I am used to cheaper products where the parts only half fit or important components are missing, or where the instructions were confusing and unclear. This chair's instruction manual was very clear and concise. The diagrams were easy to understand and neat. The screws came labeled and separated and also included the scew types and sizes/lengths, which is handy in case you need to pick up extras at a store somewhere. But they also included one extra of each type of screw, washer, and cover, which I appreciated during assembly. (I didn't find myself worrying what would happen if I dropped a screw, which is something I would normally be distsracted by while working.) The only things I would take points off for were these: 1. The instructions said the chair came with gloves for assembly, but no gloves were included. That was fine with me, but why mention them if you won't include them? The instructions even later say not to use the chair if not all components were present...but all the important ones were, so I assembled it without gloves (as I probably would have done anyway, since it was for me and not another person). 2. It matters which side of the seat is the front, but the sticker was confusing. The instructions show a sticker placed on the side that is the front, and that is where my sticker was placed. However, the sticker says "FRONT" and has an arrow pointing somewhere. In the instructions this arrow pointed to the front. On my seat, however, the arrow pointed to the back. So am I supposed to believe the sticker placement (it was diagonal, so it looked haphazardly slapped on) or the arrow? On that particular step the piece you are screwing into the seat can fit both ways, but thankfully there is a later step where it becomes obvious which side is the front vs. the back. (The arm rests can only be attached to the back.) So I wish that had been clearer up front, but otherwise it was okay. Recommendations for assembly: - To attach the wheels, apply firm, direct, straight-down pressure. I tried screwing them on at first but you just push. Make sure they go in the whole way like the picture shows. - When they say to tighten the screws to only 60%, it's a helpful tip, because you can't fit the armrests on both the seat and chairback at the same time with the screws completely tightened. Just tighten them enough to fit the pieces on, then later you can tighten up the screws. So far I find the chair to be very comfortable and I'm exceedingly happy with it. The lumbar support seems like it could potentially be a little chafy or scratchy, but I'll give the chair a chance before deciding if it's problematic or not. Like I said, I only got the chair today, so I can't speak much to its long-term comfort, durability, or longevity. But I was so impressed with how easy and straightforward they made the assembly that I had to write a review to show my appreciation.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 9, 2026
A
Verified Purchase
Alicia Sherman
San Leandro, US
★★★★★ 3
It's okay
Color: Black
Appeared to be a super comfortable chair. Purchased for my mother to work from home and the material is apparently slightly itchy and the arm rest isn't quite comfortable. It was pretty simple to put together but it did take some time.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 11, 2026

recommand products

Ksd / Marina P: Bite The Dust - 12-INCH SINGLE
34.00
Shimza: Ascendent - 12-INCH SINGLE
271.00
Nicolas Masseyeff: Muse - 12-INCH SINGLE
16.98
The Golden Filter: End Of Times - 12-INCH SINGLE
16.98
Acronym City: Powermoves - 12-INCH SINGLE
15.98